Electrocardiograph EPG 6 View
TECHNICAL SPECIFICATIONS:
LCD DISPLAY: 320 x 240 pixels, 3 or 6 channels in Standard or Cabrera format with baseline configuration.
HIGH RESOLUTION THERMAL PRINTER (8 points / mm): 3, 6, 12 channel hardcopy in real time, with the possibility of printing the millimeter grid
RECORDING: manual or automatic
MEMORY: 10 seconds for each lead
IMAGE: with memory rotation for review and copy of acquired signals
DIGITAL FILTERS: for eliminating muscle tremor, power line and baseline
POWER SOURCE: by internal Ni-Mh batteries with high capacity and fast charge time
USE: very simple through quick keys and pre-defined menus
PORTABLE: small size and light weight
TRASSED PROCESSOR: for complete digital signal processing
Easy to load paper
POWER SOURCE: internal rechargeable Ni-MH batteries, 2Ah
LINE POWER SUPPLY: 220V ~ ± 10% 50 to 60 Hz 150 mA max isolation CL2 B
BATTERY LIFE: 2.5 hours
APPLIED PART: CF type
INPUT IMPEDANCE:> 100 Mohm
FREQUENCY RESPONSE: 0.05: 145 Hz
CMRR:> 100 dB CONSTANT TIME:> 3.2 sec
ACQUISITION: 12 bit 800 samples / sec / channel-isochrones
LEADERS: 12 Standard or Cabrera
SENSIBILITY: 5 mm / mV 10 mm / mV 20 mm / mV ± 5%
ROLL SPEED: 5 mm / sec 10 mm / sec, 25 mm / sec 50 mm / sec
SIGNAL MEMORY: 10 sec For each lead
PRINTER: 8 dot thermal printer / mm, 110 mm paper
DISPLAY: 4.7" TFT LCD 320x240 pixels CFL backlight
FILTERS: muscles tremors 35 Hz digital line interference 50 Hz 60 Hz
digital 0.5 Hz high pass
DISFIBRILATION PROTECTION: internal
REAL TIME CLOCK (INTERPRETIVE MODEL ONLY)
DIMENSIONS: 240 x 160 x 65 mm
WEIGHT: 1.500 gr
CASING: IP 20
OPERATING TEMPERATURE: + 10 ° C ~ 40 ° C
STORAGE TEMPERATURE: -10 ° C ~ 40 ° C
RELATIVE OPERATING HUMIDITY: 25% ~ 95% non-condensing
COMPLIANCE STANDARDS: 93/42 / CEE EN60601-1 EN60601-1-2 IEC601-2-25